There is a hot glue burn.

Some nasty little burns can be caused by molten glue in hot glue guns.If you get burned, rinse or soak the area in cool water for at least 10 minutes, then start working on removing the glue from your skin.If you have a small 1st or 2nd degree burn, cover it with a dressing and keep it clean.If the burn is getting worse, you should call your doctor.

Step 1: Don’t wipe off hot glue on your skin.

Don’t do it if you want to get the hot glue off of your skin.You will burn them if you try to wipe it away with your fingers.If you try to wipe the glue on your pants or a towel, you will probably pull the skin under it.Peeling away the skin along with the glue increases the risk of infections and makes the burn more painful.Continue with the rest of the treatment plan if you can’t stop yourself from wiping the glue away.Some glue is still on your skin.

Step 2: The burn can be placed under running water or in a bowl of water.

As soon as possible, do this.If you can’t stick the burned area under the faucet or spigot, use a bowl of cool water.Cool water, ice water!Dunking your hand in ice water can cause more damage to the skin.Applying ice directly to the burn can cause skin damage.The hot water valve should be opened if the tap water is cold.It will help treat the burn if the water temperature is below the body temperature.

Step 3: While cooling the burn, remove any jewelry that is tight in the area.

The most likely spot for a hot glue burn is your fingers.If you burn a finger with a ring on it, slide off the ring and keep the area under running water or cool water.If the ring is too tight to remove, can’t be removed without a burn, or has been glue to your skin, skip this step.The burn may cause your skin to swell over time.A medical professional may need to cut your ring off if your finger swells significantly.

Step 4: Water should be used for at least 10 minutes to cool the burn.

If the burn starts to feel better, keep cooling it for a minimum of 10 minutes.If the pain doesn’t go away after 10 minutes, keep going for another 5 minutes.Hot glue from a glue gun can cause 1st degree or low grade burns, both of which can be treated at home.If any of the following are true, you should get medical assistance.The burned area is too large to fit in a circle.blisters form quickly2nd degree burn is a sign that can be managed at home.The skin is either white or black.It is very unlikely that this is a 3rd degree burn.

Step 5: While keeping the burn in water, Rub the glue gently.

Don’t worry about the glue on your skin until you’ve soaked the burn for at least 10 minutes.With the burned area still under running water or in a bowl of water, softly rub the hardened glue with the pad of your index finger or thumb.Over the course of a few minutes, the glue on your skin will peel away.Don’t try to remove the glue from your skin.Your doctor can give you advice.

Step 6: Rub the cotton ball over the residual glue after soaking it in olive oil.

Once you have rubbed away most of the glue, you can remove the burned area from the water.Put some olive oil in a small bowl and dip a cotton ball in it.Rub the cotton ball over the glue on your skin.The cotton ball should be dipped as needed.The glue will lift from your skin over time.Olive oil seems to work well here.

Step 7: Use more cool water to rinse the olive oil.

You can put the burned area back under the cool running water or in a bowl of cool water.Rub the burn with your finger or cloth if necessary after rinsing the oil completely.If you leave oil on the burn, it could make your injuries worse.Oil, butter, and/or petroleum jelly are good burn remedies and should not be used.These products can cause additional damage by trapping residual heat against the burn.

Step 8: The burn should be dry with a clean cloth.

The burned area should not be touched or wiped.When the area is mostly dry, lightly rub it with the cloth.If the cloth sticks to the burned area, place the burn and cloth back under or in cool water, and allow it to air dry.

Step 9: The antiseptic product can be sprayed on or rubbed on with a cotton ball.

If you have an antiseptic spray, apply a light coating to it.Since antibiotics can trap in residual heat against the burned area, don’t use them in this case.If you don’t have an antiseptic spray, soak a cotton ball in white vinegar and lightly apply it to the burned area.The vinegar should be allowed to air dry.

Step 10: If there is a risk of irritation use a bandage.

If your clothing doesn’t rub against or irritate the burn, or if the skin is not very red and raw, you do not need to bandage it.If there is a need for a bandage, keep the bandage away from the burn.Choose a bandage that is larger than the burned area.Wrap the area with a non-adhesive bandage material and use just enough medical tape to keep the bandage in place.

Step 11: Look at the burn at least once a day.

If there is a bandage, remove it.If the burn looks the same, wash it with cool water and a mild soap.If needed, apply a new bandage, rinse it completely, and pat it dry with a clean towel.If there is an odor or discharge from the burn, you should contact your healthcare provider.

Step 12: Burn pain can be managed with OTC pain remedies.

Ibuprofen or Tylenol can be used to ease burn discomfort.Check the package instructions carefully for any warnings about potential side effects and drug interactions, and take any pain relief product exactly as directed.If you have questions or concerns, contact your doctor or pharmacy.