Sand is dyed with paint.

A fun way to create colored sand is by dyeing it with paint.You don’t need much more than white sand, different paint colors, bowls and a spoon to dye it.If you want the sand to dry out, you need to let it dry for at least 24 hours after using the paint.

Step 1: White sand is separated into a bowl for each color.

Use a separate bowl for each color of sand you want to make, and place disposable bowls on the table.Make sure to fill the bowls up to three-quarters of the way full so you have room to stir.White craft sand will show up more vibrantly than regular tan sand, so it’s best to use it.Before dyeing the sand, you should use a sifter to get rid of any pebbles or dirt.

Step 2: There is a pile of sand.

You will likely have to add more paint after you mix it with the sand because this measurement doesn’t need to be exact.If you want to paint the center of the sand pile, use a different paint color for each bowl of sand.Purchase paint from a store.

Step 3: The water will help with stirring.

It’s easier to distribute the color when the paint is loosened.If needed, add more water to each bowl of sand.You can always add more water if you don’t know how much you need.

Step 4: You can mix the paint and sand with a spoon or fork.

If you get paint on your utensils, use a disposable spoon or fork.When Stir the paint, water, and sand together thoroughly, watch it blend in with the sand until the color is evenly spread out.It takes a little bit of time for the paint to be distributed evenly, so be patient while stirring.

Step 5: Continue adding paint to the sand until you get the shade you want.

If you stir your paint and sand together and it is not as vibrant as you would like, you can mix it again.Continue adding paint until you like the color.The same method is used to create the other colors of sand.Adding more water to the sand will help with the mixing.

Step 6: Sand can be spread on a cookie sheet to dry.

Line a baking sheet once the paint and sand are fully mixed.Spread the painted sand out in an even layer using a spoon after pouring a bowl of it onto the paper.The sand needs to be dry overnight so it can be used.There is a tray for each color of sand.You can pour the sand directly onto the counter if you don’t have enough trays.The sand will turn a lighter color as it dries.

Step 7: To dry the sand quickly, bake it in the oven.

Put a sand color on a baking sheet and put it in the oven.If the sand is still wet after a couple of minutes, you can stir it with a spoon to get the heat out of it.If you’re worried about getting paint on your baking sheet, line it with parchment paper.It’s a good idea to bake each color of sand separately.

Step 8: If you want the sand to be smooth, use a spoon.

The sand can be loosened by pressing the back of a spoon onto it.If you want, you can use your fingers to break up the sand.Sand can be used to fill vases or bottles.

Step 9: The painted sand can be kept in an air-tight container.

To make sure your sand doesn’t mix together, place each of your colors in a different container.Seal them up with a plastic container or bag so the sand doesn’t leak out.If you can’t see through your container, label it with the color of sand so you know which one is which.