How To Plant Viburnum

A group of plants called viburnum are used as shrubs and hedges.These plants are located in spots with full sunlight and moist soil.They can be planted in holes several feet from other plants and obstacles.Pruning and weekly watering are ways to maintain your plants.viburnum can become a colorful plant in your garden with a little care.

Step 1: The area has full sunlight.

The viburnums thrive in the sun.They are hardy plants, so they can survive the strongest weather conditions.Most viburnums will do well in partial shade.Areas that get four to six hours of direct sunlight a day have partial shade.It is possible to have partial shade behind your house.The area is sunny in the morning, but covered by the house’s shadow later on.Those under larger plants get less than three hours of direct sunlight a day.A few varieties, such as arrowwood, can survive in low shade, but sunny or partially shaded areas are ideal.

Step 2: The soil should drain well.

You should observe your yard after a hard rain.There are places where the rain doesn’t drain after six hours.viburnums do best in moist, drained soil.

Step 3: It’s a good idea to check for slightly acidic soil.

A soil testing kit can be found at a home and garden store.The viburnums take well to neutral or slightly acidic soil.If your soil is out of balance, try raising it with limestone.The optimal soil pH is between 6 and 5.5.Some viburnums may grow in slightly alkaline soil.

Step 4: The planting spot should be clear.

The spot where weeds and grass grow is good for growing.You will have to dig up plants that will compete for resources.You should also remove any rocks you find.Break up dirt clumps by Raking the soil.Finish by touching the soil level.

Step 5: In the fall or spring, plant viburnum.

The fall is a great time to plant.The viburnum has a chance to settle in before winter if you wait until the summer heat fades.Most plants are available for purchase during spring planting.

Step 6: They should be placed far away from plants and obstacles.

Take five feet from other plants.The spot should be at least five feet from any obstacles.You may need to give them more space to grow because many varieties grow big and tall.How much space you need depends on what the viburnum looks like at maturity.The plant has green leaves and flower clusters.

Step 7: The hole should be larger than the plant’s roots.

As deep as the plant’s root ball, dig your hole.You can make a hole as deep as the container if the viburnum was grown in a container.Follow up by widening the hole.It should be as wide as the root ball.

Step 8: The plant needs to be removed from the container.

Before planting the viburnum in the ground, it is important to remove the container.The roots can spread through the hole you made.Put the plant in the middle of the hole.In a pot, viburnum can be grown.The European cranberry bush can fit in well-draining containers.Prepare to water the plant more often.There are plants that can be planted.They should be placed in a container filled with half sand and half peat.Place the container in the sun and keep the soil moist.It is much more difficult to grow seeds.The seed is vulnerable to the environment because it takes several years to grow.

Step 9: If you fill the hole halfway, water it.

The soil should be pushed back into the hole.If the hole is halfway full, stop and water it.The soil is rich and moist if you water it well.It will be easy to dig through.Pick up some dirt.Even if you bounce it in your hand, it will stick together.Poor soil can be amended with a layer of compost at the bottom of the hole.This will help the plant grow.

Step 10: Once the water has drained, fill the hole.

Before you finish working, let the soil return to normal.The rest of the soil should be returned to the hole.The plant’s roots should be covered.The plant needs to be secured in the soil.

Step 11: The soil needs to be watered thoroughly.

Give the viburnum another dose of water.When the soil is moist, spray water over the planting area.The damp conditions that lead to diseases like root rot will be created if you go too far.If you leave any water on the blooms and leaves, it may lead to mildew.

Step 12: In the spring, surround the plant with compost.

You can get a good compost from a gardening store.Spread it over the growing area.Spread it all the way from the plant to the branches.In the summer and fall you can add compost again.Extra composting provides extra nutrition, so you won’t need to apply compost more than once a year.

Step 13: mulch the soil

A layer of mulch, such as wood chips, should be kept over the growing area.After you finish adding compost, you can place it down.The viburnum has a stem that is a couple of inches beyond the mulch layer.It should be spread a foot beyond the viburnum’s branches.The mulch should not be placed against the plant.Since the mulch helps absorb water, it can cause your plant to rot.

Step 14: It is advisable to water the plant during dry months.

viburnum plants do well on their own after the initial watering.The only problem is when the soil dries out.Water the plant until the soil is moist if your yard gets less than one inch of rain in a week.The soil stays moist if you do this two or three times a week.Potted viburnum requires more observation.In hot weather, you may have to water them once or twice a day.Make sure you don’t add too much water to the soil.When watering the viburnum, use your judgement.Water the soil if it seems too dry.

Step 15: The plant should be Prune after it flowers.

After the viburnum flowers in the spring, use hedge clippers to get it under control.New branches coming up from the roots should be trimmed.To keep your plant healthy and happy, take out any broken branches.You can reduce the plant to a third or half of its size every third year.Pruning leads to denser growth.

Step 16: The spotted leaves can be treated with an antifungal.

There are black and green spots on viburnum leaves.Light-colored spots may be caused by mildew.All of them can be treated with an antifungal spray.Follow the directions on the label.Too much water causes these problems.Air circulates around the viburnum if it is kept away from other plants.Throw away any leaves that are sick.Ensuring that your plant gets plenty of sunlight will help to prevent diseases.

Step 17: Plants that are yellow or stunted should be removed.

Armillaria root rot can be seen in these signs.You can see white fungus under the bark or black strands on the roots.The plant will not survive.If you want to plant viburnum away from that spot, remove the soil.Make sure viburnum is well-watered and planted in good soil.root rot is stopped by this.If your plant’s root system becomes sick, you will need to destroy the rest of the plant.The infection will spread if there isn’t a solution.Rubing alcohol should be applied to your cutting tools before and after use.

Step 18: Pests can be sprayed away with pesticides.

There are no pest problems for viburnum.There are insects where leaves and flowers turn colors.There are signs of an insect.Some of the pests that cause viburnum are aphids, spider mites, and root weevils.The plant can be treated with a low-toxicity insecticide.The viburnum needs to be clear of weeds and fallen leaves.It is possible to remove pests using a strong stream of water or by picking them off with your hands.