How To Make Oilskin Canvas

Oilskin canvas is a type of fabric.You can sometimes find it labeled as oilcloth.Traditional oilskins are made from tightlywoven cotton fabric and a solution of boiled oil and mineral spirits.The process is very simple.If you know how to make a basic oilskin canvas, you can sew it into a variety of items.

Step 1: Cut your fabric to the size you need.

If you don’t use linseed oil on fabric, you will end up wasting it.The best fabric for this is canvas, but can also be used with duck cloth, heavy cotton, or linen.

Step 2: It’s best to wash, dry, and iron the fabric.

The fabric should be washed in cold water.Use a high heat setting to dry it.

Step 3: Add any designs to the fabric.

If you want to paint or dye your fabric, now is the time.You can’t add designs to the fabric after you treat it.The linseed oil will help seal your designs.Paint, stencil, or stamp designs onto it with fabric paint and leave your fabric blank for a natural effect are some ideas to get you started.

Step 4: Allow the fabric to dry completely.

It must be completely dry before you can paint, dye, or leave it blank.How long this takes depends on the paint you used.If you leave the fabric out to dry in the hot sun, you can speed things up a bit.

Step 5: You can put your fabric in aventilated area or outside.

Hang large pieces of fabric from a clothesline outside.Make sure to smooth out anywrinkles by placing smaller pieces of fabric on drop clothes.It’s important that you work in aventilated area.Linseed oil can cause headaches.

Step 6: You should protect your work surface.

Put on a mask and gloves.Put a protective covering over your work surface.

Step 7: In a bucket, mix equal parts of mineral spirits and boiled oil.

How much you use depends on how much fabric you are using.You should use equal amounts of both liquids.Mineral spirits and boiled linseed oil are examples.If you are dyeing a large, king-sized sheet, you should use 3 cups of each liquid.

Step 8: You can use your linseed oil solution to paint the fabric.

To apply the solution to the fabric, use a wide, flat brush.Work your way from one side of the fabric to the other using long strokes.

Step 9: Take larger pieces of fabric and dip them.

You can dip the fabric into the bucket if you did not hang it.Lift it out and squeeze the excess oil from it after you stir it around with a stick.

Step 10: It’s a good idea to wipe up pools or spills with a rag.

This also includes your work surface.Regardless of how you clean it up, linseed oil will leave stains.You don’t want puddles of it around.You should not discard the rags you used to clean the spills.

Step 11: There is a well-ventilated place to dry the fabric.

As the oil dries, it gives off heat.Even if there are no sparks to ignite it, it can still explode.If there is a roof over the set-up, the best place to dry the fabric and rags is outside.

Step 12: The rags should be hung up to dry.

Wrap the fabric and rags around the clothesline or rack.The heat generated by the curing process will be dissipated by this.It will help the fabric dry faster.

Step 13: The fabric should be left there until it dries and no longer feels tacky.

Depending on the humidity levels in your area, this can take as little as three days to a week.The longer it takes for the fabric to dry, the more humid it is.The oilskin no longer feels tacky or sticky.You can discard the rags once they are dry.This is a fire hazard so don’t throw them away sooner.

Step 14: If you wish, apply a second coat.

It will help waterproof the fabric even more if you do this.If you have any leftover linseed oil, put it in a jar or can and use it for another project.You can paint the back if you painted the oil on.You have the chance to fill in any bare patches.

Step 15: If you want, air out the fabric.

Even after it dries and cures, it will still have a smell.Leave the fabric outside for a few days.This will allow the smell to go away.