How To Make a Soap Carving

Children and adults alike can start carving soap carvings.You can use household objects such as spoons, forks, and toothpicks if you want to make your design with soap.Soap bars can be shaped into designs you want.To make a soap carving, all you have to do is find soap and tools, trace your design, and then remove the excess soap bits.

Step 1: There is a bar of soap to choose from.

The harder the soap, the harder it will be to cut it.It will be more likely to collapse if it is soft.Round soap is more difficult to cut for beginners than rectangular soap.The color that you use is up to you.Inexpensive soap is good for practice.

Step 2: You should get a knife.

If you want to make a basic shape out of soap, a carving or paring knife is perfect.Kids can use soap in a variety of ways.You may want to use an orangewood stick or toothpick as a substitute for a knife for detail work.

Step 3: You should cover your work area.

You can spread the newspaper over the area where you are carving.When you are done, you will be able to remove the soap fragments from the newspaper.You could hold the soap over the bowl as you work.

Step 4: The subject should be decided on.

The soap is only limited by your imagination.There are highly-detailed flowers and animals.A turtle, fish, or heart is a good start for beginners.These patterns don’t require much detail work and fit the shape of the soap bar.

Step 5: Get rid of the brand name.

There may be letters on one side of the bar.Place the soap under the water.You can use a sponge or knife to remove the top layer if the soap is less firm.The soap should be rubbed off until the surface is smooth.You can skip this step if you don’t mind the letters on your design or on the back of your carving.

Step 6: An outline should be drawn.

You can either etch the outline into the soap with a knife, orangewood stick or toothpick, or you can use a pencil.The outline shows what you need to do.

Step 7: The outside portions should be sliced away.

If you try to go too fast, the soap may break.Start at the corner of the soap.If you want your soap to form the basic shape of your design, cut down on your line.If you want to peel a potato with the knife, keep it between your thumb and finger and pull it through the soap.

Step 8: Begin work on the detail.

At this point, you may want to use a pointed knife, orange wood stick, plastic fork, toothpick, or other sharp, precise instrument.To get small details such as eyes, scales, and petals, you have to work from the middle of the bar.

Step 9: The soap has to be Polish.

Use a paper towel or your fingers to remove soap from the surface.Use as little pressure as possible.Adding a lot of details will cause the soap to be fragile.Rub the surface to create a smooth finish.If you do this, the soap should be dry for a day.

Step 10: Use perfumed soap.

You can add some flair when you get scented soap.Cut the soap into a pineapple shape.The design shows exactly what kind of soap you have and is a simple way to practice carving.

Step 11: There are layers of flowers.

Use detail work to create more elaborate designs instead of cutting out a simple block shape.A sharp carving tool is needed to achieve three-dimensional flower carvings.As you sculpt thin petals, shave away excess soap in the center of the flower.

Step 12: A character profile can be created.

You can emphasize the head and upper torso if you choose to make the character out of soap.You won’t have to cut the soap to start.Start in the center and make an outline.You can remove layers on the top surface of the picture to make it stand out.A sharp tool is needed to etch details.Since the face and upper body are larger, you have more of a chance to emphasize a character through precise details, such as lines for the hair, lips, and clothing.