How To Find Out the Maximum RAM Capacity for Your Computer

Random access memory is the memory that your computer uses to store data.The more programs you can run at once, the more ram you have.The amount you can install is determined by both your hardware and your computer’s operating system.To figure out how much RAM you can add to your computer, you need to check both.

Step 1: Determine if Windows is 32-bit or 64-bit.

There is a maximum amount of RAM that the Windows operating system can recognize.Extra RAM will not be used if you have more than allowed.If Windows is 32-bit or 64-bit, this limit is determined.Check your copy of Windows with this guide.You can see if Windows is 32- or 64-bit from the System Properties window.

Step 2: Take a look at your Mac model.

Depending on the model you are using, the amount of RAM your Mac can support varies.Many Macs have different amounts of memory.For exact numbers, check your Mac’s documentation.The iMac is one of the more popular models.

Step 3: Determine the amount of support your Linux system provides.

If the PAE kernel is enabled, a 32-bit system can support up to 64 gigabytes of RAM.It is possible for a Linux system to support up to 17 billion gigabytes of RAM, but most systems have a limit on the amount of memory they can hold.To find out the exact amount your system can support, open the Terminal.You can type dmidecode -t 16.The administrator password will be asked.The maximum capacity is entry.

Step 4: You need to identify your board.

Even if your operating system supports a lot of RAM, you are limited by what your board can support.If you don’t have access to your documentation, you will need to look up the specifications online.You will need to open your computer case to see the model number.

Step 5: Look at the documentation.

You should be able to find a specifications chart near the beginning of your documentation.Look for the maximum amount of memory that can be installed.You can see the number of available slots on your computer.Pairs of RAM need to be installed.You can install up to four sticks or two sticks to reach your maximum if your board supports 16 gigabytes of ram and has four slots.

Step 6: You can use a system scanning tool.

If you’re not comfortable opening your computer or reading through your documentation, there are online tools that can help you find out how much memory you have, as well as the type and speeds supported.You can find them on major memory manufacturers’ and retailer’s websites.

Step 7: You should upgrade your RAM.

You can install your new RAM after you determine how much your system can support.If you are adding new RAM, make sure the clock speed matches the original one.Instructions for installing new RAM can be found in this guide.