How To Dye Candles

If it were your favorite color, it could make your candle even better.You can personalize your candles by dyeing them.If you want to make your own candles, start by melting an old candle or two on the stovetop in a double boiler.Slowly add a small amount of powdered or liquid candle dye until you achieve the shade you want.Once the wax is just the right color, pour it into an empty mold and allow it to harden.

Step 1: If you want to upgrade, pick out an old candle.

Light shades that are white will allow the dye to show up better.It will be easy to work with plain container-less candles since you’ll be melting them down.To remove the wax from a jar or tin candle, use a butter knife.You can make a big candle with multiple smaller candles if they’re all made from the same type of, seashells, or glitter should not be included in the candle you choose.Don’t use scented candles.The perfumes that have been added to the wax can be affected by melting down.

Step 2: Purchase blocks of wax to make your own candles.

If you want to make your own candle, purchase a package of blocks.One of the easiest types of wax to use is paraffin.Some candle-making supplies can be found at arts and crafts stores.If you prefer the type of wax you use, soy or beeswax chips may be available.You need to pick up enough uncut wicks for each candle to have at least one.

Step 3: To heat the wax, set up a double boiler.

If you don’t own a double boiler, fill a large pot halfway up with water and warm it over medium-high heat.A second heat-safe container, like a glass mixing bowl or measuring cup, should be placed inside the first so that it is above the water bath.The heat from the pot will be transferred to the smaller container.If you don’t want to clean candle wax out of your cookware after you finish the project, you can use a metal coffee can or similar container.Wax should never be exposed to direct heat.This could cause a fire or ruin its consistency.

Step 4: The wax blocks can be cut into pieces.

Use a sharp knife to break up the wax into cubes.This will help it melt faster.It will take less time for the wax to liquefy if the pieces are smaller.If you want to avoid scarring your work surface, set the candles or blocks on a cutting board.When handling a knife, be careful.Candle wax may be a little slick because it is an oily substance.

Step 5: The wax should be added to the boiler.

The cut-up candle should be placed above the water bath.If you want to make a lot of candles and want them to be big, drop in a few blocks.These can be cut into smaller pieces to speed up the melting process.A standard jar candle can be made using 2 2.5 blocks of paraffin, while 5 blocks will produce an oversized candle closer in size to a quart-sized milk carton.

Step 6: The wax should be melted into a liquid.

The wax should be stirred periodically to break it up.It will start to liquefy in about 10 minutes.By the time it is melted, it will be completely smooth.It is ready to accept the dye.You can use a wooden spoon or popsicle stick to do your stirring.It may take a little longer for the same amount of wax to melt completely.

Step 7: Purchase a candle dye.

Liquid dyes are sold by many candle companies.Almost any candle can be colored with other all-purpose dyes.You should choose an appropriate dye for the type of wax you are working with.It may not blend right.There are powdered dyes that can be useful for dyeing candles.Liquid dyes like food coloring can be avoided.When combined, the watery dye and oily wax will cause a mess.You can use crayons to keep things simple.The candle and crayon are both made of wax.

Step 8: A small amount of dye is added to the melted wax.

If you are working with a powdered dye, you can squeeze in a few drops.Don’t oversaturate the wax, candle dyes tend to be extremely concentrated, so a little bit goes a long way.Depending on the size and number of candles you are making, as well as the depth of color you want, the amount you use will be different.It is easy to dye with crayons.Drop as many pieces of the crayon as you need, and stir, just peel off the paper label.

Step 9: For 2 minutes, stir the dyed wax thoroughly.

Continue to move your stirrer slowly through the melted wax.This will make sure that the dye is distributed evenly.Determine if it is dark enough for your liking once the color is uniform.You could end up splattering wax all over your work area if you stir too fast.

Step 10: Gradually add more dye until you get the color you want.

The candle will be bolder and more vibrant the more you use it.You may have to use double or triple the amount of dye that you normally would if you want to make hunter green or navy blue.When pouring the pigment, stir constantly.For estimating how much dye to add is a good rule of thumb.You would need 0.227g of dye to color 1 pound of wax.

Step 11: The wax should cool to 135–140 F.

When you’re satisfied with the quality of the color, turn off the boiler and remove the melting container from the heat.The wax needs to cool before it can be poured.If you want to know the temperature of the wax, use a kitchen Thermometer.It is possible to cause damage to glass containers by pouring wax at higher temperatures.

Step 12: The container should hold the new candle.

You can reuse the original jar if you want to dye an old candle.If it is heat-safe, has an open mouth, and is large enough to hold melted wax, almost any container will work.Candles can be made from metal cans, shot glasses, tea cups, and mason jars.Use empty tea light holders to pour candles.Cut the top off of a quart-sized milk carton to make free-standing candles.Once the wax has set, you can tear the cardboard away.

Step 13: The empty mold has a wick in it.

Take an uncut candle and tie one end around a wooden object.The bottom of the container should be reached by the opposite end.If you want the wicks to hang straight down, set the dowel over the open mouth.A wooden clothespin or strip of tape can be used to hold a candle.Tie a second candle 1.5–2 inches away from the first to create a double candle.

Step 14: The wax should be poured into the mold.

It is possible to grab a funnel or pour spout to keep from making a mess.If you leave a little space at the top of the mold, there will be room for the melted wax to collect as the candle burns.If you want to make smaller candles, use leftover wax or wait until it dries to dispose of it.

Step 15: Allow the wax to set up.

It may take up to an hour for the wax to solidify.It will assume the shape of the container and you will have a brand new homemade candle in your favorite color.Don’t touch the wax in the meantime.Depressions, smudges or other flaws could be left behind by doing so.While the wax is setting up, be careful not to disturb the wicks.It is possible to speed up the hardening process by placing the freshly-poured candle in the refrigerator or another cool area.

Step 16: It is a good idea to trim the wicks.

You can untie or cut the wicks.Take a pair of scissors and cut a small hole in the surface of the wax.A warm glow will be added to any room when your new candle is ready to light.Leaving the candle too long will cause it to burn inefficiently, while leaving it too short will make it hard to light.