A manicure or pedicure is a great way to relax.Salon level care can be expensive.It is possible to get salon style nails at home.Apply a layer of base, nail polish, and top coat after you file your nails.You’ll get high quality nails that will impress your friends and family.
Step 1: Prepare your tools.
You will need certain supplies in order to do a great manicure.Most supplies can be purchased at a drug store.To do a salon style manicure, you will need the following: Nail polish, a base coat, and a top coat.
Step 2: An acetone-free nail polish removal is recommended.
acetone nail polish removers tend to work quicker.They have harsh chemicals that can wear down nails.If you do your nails frequently, you should use an acetone free polish remover.Check the ingredient list of any polish remover you use to make sure it doesn’t contain acetone.
Step 3: Remove nailpolish from your nails.
You will need to remove any previous polish.You can skip this step if you don’t have old polish on your nails.You should not use nailpolish on your nails.Use a cotton ball to remove the leftover polish from your nails.
Step 4: Cut your nails moist.
Before applying any polish, you should wash your nails.This can help keep your nails healthy.There is a small flap of skin near the root of your nail.Apply a small amount of cream to this skin.Take the cream and massage it into your skin.
Step 5: You should wash your hands for two minutes.
Take a bowl of warm water and shower gel.The bowl has your fingers in it.They should be allowed to soak for two minutes.You can use a clock to track time, but you may be able to gauge the two minute mark by just counting to 120.
Step 6: Cut the old cuticles.
A cuticle pusher is a small wooden or plastic stick.You can use this to push your cuticles back so they join your fingers.Under the pushed back cuticles, there is an older one.If you want to cut off your cuticles, take your cutter and run it along the length of your body.You want to be careful with this step.As you cut your cuticles, be very gentle.Slow motions are used.It is possible to cause an infection by forcefully cutting or pushing your cuticles.Don’t forget to soak your fingers.The cuticles will move easier if your hands are wet.This can help prevent infections.
Step 7: You should clip and file your nails.
If your nails are not what you want, you should file them.A set of nail clippers and a nail file can be used.To smooth out the tops of nails, you should use a nail buffer.To shorten your nails, trim them to your desired length.Take a file and make it into a shape.Salon style manicures usually round out the edges of the nails.To create a squared look, file each nail flat across the top and make sure the edges aren’t too sharp.For a rounded look, file the tips of your nails into a soft curve.You should only file your nails in one direction.You should start at one edge and work your way over to the other.metallic files can be too harsh, so don’t use them.You can use an emery board or crystal nail file.Rub your nail buffer over the top of your nails.Don’t buffer for too long.polish may slide off if nails become too smooth.
Step 8: You can add a base coat.
A base coat will protect your nails.It will make the nail polish look better.The base coat should be applied to your nails.You can cover your nails with three strokes.If there are any bumps, use shorter strokes to smooth them out.Allow nails to air dry for the best results.Adding multiple layers can be time consuming.If you want to dry your nails with a hairdryer, make sure to set it to low heat.You could end up burning your fingers if you set it to high or medium heat.
Step 9: There is one layer of nail polish.
Adding nail polish in layers will give you the best results.Start with a thin layer of polish.If the polish looks a little light, don’t worry.Adding the second layer will make it darker.Apply with two to three strokes.To smooth out the polish, use shorter strokes.The base coat is dried the same way.You can use a blow dryer to dry your nails.
Step 10: The second layer of nail polish should be added.
If you want to cover your nails in a second coat, use two to three strokes.If you have to smooth out lines or bubbles, use a few shorter strokes.This will make your nail polish lighter.You can use a blow dryer to dry your nails.
Step 11: Add a coat.
Your polish can last up to two weeks with a top coat.It will make your nails look better.You should apply a top coat the same way you applied the other layers.The last polish you’ll be applying will make the top coat look smooth.
Step 12: Allow the nails to dry.
If you allow your nails to air dry, they will look better.It can take up to an hour for nails to dry completely, so avoid touching or handling anything until your nails have dried.Something to do will distract you.You can listen to some music or watch a TV show.
Step 13: Use a q-tip to clean the edges of your nails.
When you work slowly and carefully, a small amount of nail polish may spill onto the skin around your nails.A q-tip in nail polish can make your manicure look professional.Rub the q-tip on the skin of your nails to remove any rough edges.Go slowly.You don’t want to rub your nails yourself, as this will remove the polish.
Step 14: Reapply a cream.
Products used in nailpolish can hurt your nails.Once you’ve done your nails, it’s a good idea to add another layer of skin care.You should apply a cuticle moisturizer to each of your nails.Rub the moisturizer on your skin.
Step 15: You should gather your materials.
Gathering your pedicure materials is the first thing you need to do.Most of the materials you need can be found at a local drug store, supermarket, or beauty shop.In order to do a salon style pedicure, you’ll need the following: acetone free nail polish remover Sea salt and a bowl big enough for both your feet.
Step 16: The old nail polish needs to be removed.
Remove your nail polish.Don’t soak toenails in polish.A cotton ball is used to remove nail polish.Wait until your toenails are free of old polish.You can skip this step if you don’t have leftover polish on your toenails.
Step 17: You can do a sea salt soak.
The skin on your feet needs to be wet and loose in order to remove dead skin.A sea salt soak can help with this.Add a capful of dead sea salt to your bowl.Put your feet in the basin.
Step 18: Cut and file your toenails.
Cut your toenails with a toenail clipper.Even with the tops of your toes, they should be short.To make a nice curved shape, round out the edge of each nail with a nail file.Rub the edge of the file along your nails until they wear down and form your desired shape.If you want to file down your toenails, you should use an emery board nail.
Step 19: You can use your foot file to file rough spots on your feet.
If you have calloused spots on your feet, rub your pumice stone on them.The heels and big toe are troublesome areas.Rub until you get rid of the rough, calloused skin on your feet.
Step 20: It’s time to exfoliate.
After removing rough spots, you’ll want to get rid of dead skin cells.There are dead skin cells on your feet.Rub the areas you filed down with your exfoliant.Rub with enough force to get rid of flaky skin.When you’re done, wash your feet with tap water and dry them with a towel.
Step 21: Take care of your feet.
After the filing process, your feet will be a bit dry.It’s important to replenish lost oils.To target the areas that were filed, Rub a generous amount of foot cream over your feet.You should get foot cream between your toes.When it’s dry, these areas are often neglected.
Step 22: Push back and make a cut.
Take your pusher and push your nails back.The base of your nails are covered with small flaps of skin.If you want to remove your cuticles, you have to take your cutter and run it along their length.Don’t move too fast and be gentle.When it comes to a risk of infections, toenails are the same as fingernails.Infections can be caused by pushing or cutting with too much force.
Step 23: Apply a base coat after putting in your toe separator.
Put your toe separators on your feet.Toe separators have slots for each toe.The space between your toes is designed to prevent you from getting polish on your skin.Add a base coat to each toenail once the separators are in place.The base coat should be applied with a couple brush strokes.To smooth the polish out, use a few shorter strokes.Allow the base coat to dry before moving on.
Step 24: Allow it to dry after applying a layer of nail polish.
Apply a layer of nail polish after your base coat is dry.You should apply two layers of polish to your toes.Allow your toenails to dry.It is easier to allow toenails to dry.Try to keep your feet propped up and avoid walking too much.During the process, you can read a book or watch a TV show.
Step 25: A top coat is recommended.
Once your toenails are dry, apply a layer of top coat.This will make your polish last longer.Allow the top coat to dry completely once it is on.
Step 26: Use a q-tip to clean around the edges of your nails.
Take a q-tip and apply nailpolish.Remove any polish that got onto the skin surrounding your nails.To avoid accidentally removing polish with the q-tip, go slowly.
Step 27: It’s a good idea to apply a cuticle moisturizer.
When you’re done with your pedicure, apply a cuticle moisturizer.During the process, your skin will have dried out.Take a cream and apply it to the skin.Rub the moisturizer on the skin until it has dissolved.
Step 28: Pick at your polish.
It’s tempting to pick at polish if you’re nervous.You don’t want to ruin your new manicure or pedicure.Pick at the polish.It’s possible to give yourself something else to think about.You can wear a rubber band around your wrist.Play with that instead of your nails when you are nervous.
Step 29: When cleaning, wear rubber gloves.
Chemicals can wear down nail polish.Make sure to wear rubber gloves when cleaning and doing dishes in order to prevent your polish from coming undone.
Step 30: After two weeks, remove the polish.
It’s not a good idea to leave nail polis on for more than two weeks.This can cause damage to the nails.For two weeks, remove the polish from your manicure.