How To Do Resist Printing

Resist printing is a technique for printing color on fabric, where a resist paste or material is imprinted on the fabric and then dyed.It’s possible to resist printing on a piece of clothing or fabric at home.It’s possible to resist printing with glue, wax, or printing blocks.Resist printing is a fun way to get into at home.

Step 1: Pick out the fabric.

It is possible to choose a fabric for the resist printing.Heavy fabrics like wool or silk can be avoided.The print stands out more if the fabric is white or light in color.

Step 2: There is wax paper underneath the fabric.

Place wax paper underneath your fabric to protect the surface you are working on.The wax paper and fabric should be placed on a table.The wax paper should line the fabric so no glue or paint can get on it.

Step 3: You can use liquid glue to make a design on the fabric.

Clear glue is easy to wash.As you draw on the fabric, hold the glue steady.You can use lines, circles, spirals, or shapes.You could try a floral pattern.The design that is resist printed onto the fabric is the design you make with the glue.The glue shouldn’t get too thick on the fabric.A blurry design can be caused by too much glue being used on the fabric.

Step 4: Let the glue dry.

Let the glue set overnight after you have created the designs on the fabric.The fabric should be placed in a spot where it won’t be touched.When it dries, clear glue should look clear.

Step 5: The fabric needs to be painted.

Put out craft paints and paint brushes after Laying out the fabric with the glue designs.Pick out colors that look good on the designs.The paint should be brushed over the glue on the fabric.To create a background color for the glue designs, cover the entire piece of fabric with paint.If you want to blend colors, use just one color.You can paint the designs you see fit.You can use water based paints.Oil based paints won’t dry well.The glue can distort the design if the paint is too thick.Paint the fabric with one to two coats.

Step 6: Allow the paint to dry.

It will be easier to rinse off the glue when you give the paint time to dry.The drying time depends on how you want the colors to appear.If you want the paint colors to appear darker on the fabric, you should let it dry for a while.If you want the paint colors to appear more subdued, let them dry until they are damp to the touch.Once they are dry, rinse them off.

Step 7: Warm water will wash off the glue.

Once the paint has dried to your liking, place the fabric under warm running water and rinse off the glue.It is to be expected that it will feel a bit slimy.Put the glue on the fabric.Rub or clean the fabric, as it can damage it.Allow the glue to melt and slide off.

Step 8: Allow the print to dry overnight.

If you want your prints to be dry, leave them out overnight.You can hang the prints on the wall.You can use the prints to make pillowcases.You can use the prints on dishes.

Step 9: Iron the fabric.

It is easy to work with fabric that has been pre-washed and iron.It will absorb dyes better if it is pre-washed.The fabric should be white or light in color.Natural fibers are used in fabrics like cotton.Wool or silk can be hard to print on with the wax method.

Step 10: Make sure the fabric is secured.

Newspaper or wax paper can be put down on a table to make the resist printing process simpler.Place the fabric over the table with tape, pins, or staplers.When applying wax, make sure the fabric is taut over the table.If you don’t want to get wax or dye on your hands, you can put on medical gloves.

Step 11: The wax should be in the pot.

For resist printing, batik wax is used.You can find batik wax in stores.If the wax contains no dyes, it should work.Take the wax out of the pot and put it in a container.As the wax is melting, stir it so it doesn’t get too hot or burn.If you want to resist printing, leave the wax on low so it doesn’t come to room temperature.

Step 12: The wax can be applied with a brush or other tool.

Take the paintbrush and dip it into the melted wax.Apply it to the fabric you want.To make a pattern, make dots, circles, lines, spirals, or shapes on the fabric.Don’t put too much wax on the fabric.Apply wax one layer at a time.You can use tools like a potato masher, a chopstick, or any other object with an interesting texture to make fun shapes or patterns on the wax.Make sure the wax is not on the other side of the fabric.The wax is not the right temperature if it appears yellow at the top of the fabric or spread out on it.It shouldn’t be too hot or too cool.

Step 13: Let the wax dry.

Once you have made many patterns and designs on the fabric, let the wax dry on it.The wax can set if you put the fabric in a safe place.

Step 14: The fabric should be dyed.

The fabric should be dyed in the colors of your choice after the wax has dried.You can use a bucket or sink to dye fabric.The washing machine can be used to dye the fabric.Start with the lightest color.The darker the color, the better it will mix with the first color.The lightest color will show up on the waxes while the darker color is the main color.You could start with yellow dye as the first bath.You may use turquoise as the next dye bath.To make a green background color, mix this with yellow.

Step 15: Put the fabric in a container and wash it.

After dyeing the fabric, rinse it out and then wash it in water.The wax does not melt if the water is warm.Next, dry the fabric.

Step 16: The wax needs to be boiled off.

To remove the wax, fill a large pot with water and liquid detergent.Put the fabric in the water and bring it to a boil.Take a heavy object such as a rock or a kitchen tool and weigh the fabric down.The water needs to come to a boil.The wax will float to the top of the water.Remove the fabric from the pot when the wax floats.

Step 17: The fabric should be washed and dry.

The fabric should be washed one more time in the washing machine.Hang the fabric to dry in the dryer.

Step 18: The fabric should be ironned.

It is important that you start block printing with fabric that is very flat and free of marks.You need to iron the fabric for the printing.You can use cotton or muslin for this project.If you use thick fabrics, avoid using nylon and silk.Block prints don’t usually show up on these types of fabrics.If you want the block prints to show up better, you should pick white fabric or fabric in a light color.You may be able to use a darker colored fabric if you are using lighter coloured dyes.

Step 19: Place the fabric on a table.

It is important to secure the fabric on a flat surface when printing on fabric.The fabric won’t move or shift while you are printing.You can use a wooden table to stretch the fabric and secure it with tape or staplers.The fabric should be taut over the table and not move.If you want more support under the fabric, you can layer carpet or foam over the table.Attach the fabric well with tape, pins, or staplers.

Step 20: The sponge should be soaked in the paint or dye.

The paint or dye should be squeezed into the bowl.The dye will cover one side of the sponge after soaking it.The sponge should be covered with paint or dye.Gloves are a must if you are using natural dyes.If you want to cover it, you can use a paint brush and paint the dye over it.

Step 21: The printing block should be put into the sponge.

The printing block must be covered by the color.To get dye on the printing block, press the sponge onto the block as many times as necessary.You can purchase printing blocks at craft stores.There are blocks made of wood or rubber.

Step 22: The fabric should be applied with the printing block.

Press the block firmly onto the fabric.You can apply even pressure by using your palms or fingers.Carefully remove the block from the fabric after a few seconds.To create a pattern, sponge dye the same block and press it on a new spot on the fabric.A different colored dye can be used on the same printing block.The dyes do not mix if you wash the printing block.Print blocks can be applied on the same piece of fabric.You can make your own patterns or designs.

Step 23: Let it dry.

Let the fabric dry overnight after you have done as many print blocks as you want.It’s best to put it in a flat area that won’t be touched.

Step 24: To set it, iron or rinse it.

Iron the fabric on the reverse side to set the print if you used textile paints.If you used natural dyes for the block printing, iron on the reverse side and rinse the fabric in warm and cold water with detergent.