You would think that the inside of your washing machine is clean, but this may not be the case.Bad odors, germs,bacteria, and mold can be caused by failing to clean your machine.Luckily, there are all-natural methods of cleaning your top loading machine.It is possible to ensure that your machine is clean and effective by using the right methods.
Step 1: The machine should be set to the hottest temperature and longest cycle.
Allow your washing machine to fill with hot water.The highest load size is used when doing this.
Step 2: Add four cups of white vinegar to the washer.
The washer is running.Use a measuring cup to measure and pour four cups of white vinegar into the washer as it fills.
Step 3: Baking soda can be poured into the water.
Baking soda can be added to the water.Measure out a cup of baking soda and pour it into the machine.
Step 4: The washing machine should run for 5 minutes when the lid is closed.
Allowing your machine to run will allow the baking soda and vinegar to wash away the dirt on the inside of your washing machine.
Step 5: Pause the machine for an hour when you open the lid.
It’s a good idea to let the hot water and vinegar sit in your washing machine for an hour.
Step 6: While your machine is paused, wipe the outside of it.
To wash the rest of your washing machine, use a clean cloth and a cleaner.They are great at removing soap scum and limescale.You can either buy them at the store or make them yourself.To clean dirty areas, spray the cleaner and use a cloth.Lemons, oranges, and limes are fruits that can be used to remove dirt.Make sure to wipe off the fabric softener and bleach on your washer when you clean it.You can use a toothbrush to get around.
Step 7: The washing machine needs to be finished.
You can finish the cycle in your washing machine by closing the lid.All the water has been drained from the machine.
Step 8: Make sure to wipe down the inside of the machine.
The washing machine’s interior needs to be cleaned with a dry rag.You can repeat the steps to finish cleaning the machine once it’s dry.
Step 9: White vinegar is used to fill the detergent dispensers.
If you want to fill the detergent dispenser, fill it with 1/3 cup of vinegar.The top of your washing machine is where the detergent dispensers are located.The lid should be closed once it’s filled.
Step 10: On the hot water setting, start a normal wash cycle.
Pick the “whites” or “stain” setting if your washing machine doesn’t have a hot water setting.Allow the cycle to go on.
Step 11: The washer’s exterior needs to be wiped down.
As the cycle goes on, mix 12 cup of baking soda and 1 quart of white vinegar in a bucket.Once the ingredients are in, use the solution to wet a rag and wipe down the exterior of the washer.
Step 12: You can run an additional rinse cycle.
Run a rinse cycle without detergent.The smell of vinegar should be removed with this.The washer should be good to use once you’re done.