How To Clean a Cast Iron Stove

thick cast iron is used to make many indoor wood-burning stoves.It will need to be cleaned from time to time because it is effective at containing a fire and providing heat indoors.After every use, ash will accumulate inside the firebox, and the interior can become coated with ashes and smoke.To clean the stove’s exterior, you can use a wire brush and sandpaper.

Step 1: In front of the stove, place an old newspaper on the ground.

If you scoop the ashes out of the stove, they will fall onto the ground.Cleanup will be easier with a newspaper.As you spread the newspaper, open the air dampener so that any ash stuck to it will fall into the fire.Pull the knob on the front of the stove outward to open it.Pull the air damper open if the stove is still warm.

Step 2: The ashes should be removed from the fire box.

The front of the cast iron stove has a glass door that you can open to scoop up the leftover ash.The ash should be put into a bucket.If there are no leftover ashes in the firebox, you will be able to start your next fire much more quickly.Make sure the fire is out and there are no live coals before you scoop up the ashes.Wait for the red-hot coals to cool before shoveling them up.

Step 3: Put the ash can down.

After shoveling the ashes out of the fire, put the lid back on the ash can.Set the can on a non-flammable surface.If there are still live coals in the ash, it is important to let it sit for at least 48 hours before you dispose of it.Ash and soot can be lifted from the can by a breeze, so it is important to keep it covered.You can pick up the newspapers that you spread on the carpet after tossing the ashes.Ash should not be spilled on the floor.The newspapers should be thrown away.

Step 4: The ashes should be thrown away.

When the ash bucket is full, you need to empty it and dispose of the ashes.You can spread the ashes out on the ground if you live in a rural area.If you have a compost pile or garden, you can toss the ashes on top of the soil.Wait for the wind to die down before you spread the ashes.A strong wind may reignite embers.

Step 5: Use a wire brush to remove rust.

Depending on how old the stove is and how much rust and grime has built up on its outer surface, this may take some serious scrubbing.The wire brush should be applied to the top of the cast iron stove.If you rested metal on the top of the stove, it will build up Rust.People leave tea kettles on top or use the heat of the stove to cook food.These uses can contribute to rust on the stove top.

Step 6: Sandpaper can be applied to the exterior of the stove.

If you want to clean the outside of the cast iron stove, you can use a toothbrush and wire brush to remove the rust and build-up.The first thing to do is to use a coarse grain sandpaper.It is possible to get a more fine-grained sandpaper, even one as fine as 400-grit.The stove is made of cast iron.This will remove any marks or scratches made by the wire brush.

Step 7: The stove should be wiped down with a cleaning mixture.

After sanding the stove, you can use a cleaning solution to clean any smudges of ash or dirt on the exterior surface.To clean the cast iron stove, spray the solution across the surface and wipe it clean with a few old rags.The stove should be dry before the next fire.Combine two parts water to one part water with a small amount of dish soap in an empty spray bottle to make the cleaning solution.The cleaning solution will be ready to use if you shake the spray bottle.

Step 8: Purchase a cleaning solution.

The glass doors on a cast iron stove can become blackened with soot and smoke, and can be difficult to clean.A glass cleaning solution that is specifically designed to clean wood stove front doors is the best product to use.Use the wet rags to wipe the glass door clean after spraying the product onto a couple of old rags.This product can be found at your local hardware store.Ask the sales staff if they can help you find it.Don’t get ammonia in your eyes if you use the glass cleaning solution.Don’t inhale the solution.

Step 9: Use a mixture of water and soap to clean.

If you want to use a non-toxic cleaning solution for the glass door, you can purchase an empty spray bottle.Add a squirt of regular dish soap to the mix of water and clear vinegar.To mix the ingredients, shake the bottle.You can use old rags to clean the glass after spraying the solution onto it.All of these products can be found at your local grocery store or drug store.If you are shopping at a hardware store for the other materials, you may be able to find a spray bottle as well.If you have ashes in the cast iron stove, you can mix in a few to make a mixture.The ashes make the glass shiny.

Step 10: The chimney cap needs to be cleaned.

If left long enough, tar can accumulate at the top of the chimney and cause a fire.To keep the top of the chimney clean, you need to access it via the roof.Remove the chimney cap and use a chimney brush to clean the creosote.Make sure the chimney cap is free of creosote.You have to climb up on the roof to do this step.A second person can help you by stabilizing the base of the ladder.Don’t climb up on a windy day if you are standing near the edges of the roof.